Exposed to far less heat, cold-brew is significantly less acerbic than its sweltering sibling.

As a young student of the culinary arts, there were a handful of “commandments”—central tenets of good cooking—that each of my mentors persistently reinforced (read: screamed). One such precept, which has been indelibly seared into my cortex, is that heat equals flavor. Heat browns meat, caramelizes sugar, and extracts body-giving gelatin from bones. Heat also creates aroma, concentrates flavor compounds, and melts unctuous fats. If heat is so great (which it is), why on Earth am I promoting the practice of combining ground coffee with room-temperature water and letting it infuse slowly for hours? The answer lies in the fact that heat is indiscriminate.

It’s true that coffee brewed at 210 degrees will contain more aroma compounds, dissolved solids, and flavor than coffee brewed at 72 degrees. But this is one case where more isn’t necessarily better. Along with the good stuff, heat also extracts the majority of bitterness and astringency found in hot-brewed coffee. Exposed to far less heat, cold-brew is significantly less acerbic than its sweltering sibling. Less bitterness means that the subtler flavors found in coffee beans are more perceptible. For me, good cold-brew balances hints of dark chocolate, caramel, ripe black fruits, and vanilla with a pleasant viscosity, mild acidity, and pitch perfect bitterness. If my description sounds florid to you, it’s probably because you didn’t have cold-brew this morning. In all honesty, it’s lush, nuanced, and incredibly smooth.

Still, cold-brew does have its critics (myself at one time included). Naysayers complain that cold-brew lacks the body and complexity of flavor of a heat-extracted brew. Over the years I’ve tried to extract more richness and complexity from cold-brew coffee, in the hope of achieving the best of both worlds. I’ve tried a number of out-there techniques including an initial hot water bloom (there’s that heat again); near-continuous agitation; and five-day-long extractions in the fridge. But none of these techniques improved my cup of cold-brew. What they did was turn a simple, satisfying process into a chore.

After reconciling my love of cold-brew with years of heat-focused culinary indoctrination I am now ready to pass along my own commandments on how to make good cold-brew coffee. I promise not to yell.

Step #1: Roast It

I use medium roast beans (left), which have been heated to a lower temperature than dark roast beans (right). Medium roast tastes more like coffee beans and less like the roasting process. You always want to freshly grind whole beans right before you're ready to brew.

Step #2: Pour It

I combine room-temperature water (usually filtered, as my tap water doesn’t taste great) and freshly ground coffee in a large French press. The press makes it’s a snap to separate the concentrate from the grinds after brewing.

Step #3: Stir It

After about 10 minutes, a solid raft of coffee grinds will form on the surface. I find it important to stir this raft into the water to maximize contact with the ground coffee.

Step #4

After the initial stir to combine the ingredients, this is the only other time I stir during brewing. As I mentioned before, agitation is last on the list of factors affecting extraction. I find it a nuisance to stir a batch of cold-brew multiple times over the course of a day; the good news is I don’t have to.

Step #5: Cover It

Next, I cover the French press with plastic wrap and let it sit at room temperature for 24 hours (give or take an hour in either direction). I’ve done room-temperature brews as short as 12 hours and as long as 72 hours. Twenty-four hours is consistently the sweet spot.

Step #6: Press It

After 24 hours, I remove the plastic wrap and press the grinds to separate the concentrate.

Step #7: Filter It

Then I pour the concentrate into a coffee filter-lined fine-mesh strainer set over a large measuring cup or pitcher. Some would say that this filtering step is optional, but I don’t like silt and grit in my cup. Most of the concentrate will filter through unaided, but I find it helpful to gently clear the sediment with a rubber spatula to let the last few drops through.

Step #8: Dilute It

Finally, I dilute the concentrate one-to-one with cold water and pour it into a glass with plenty of ice.

Step #9: Salt It

Now, instead of reaching for the sugar (which is unnecessary with super-smooth cold-brew) I stir in a pinch of Kosher salt. Just trust me on this one.